收藏網站
聯系我們
聯系昆山鷺工
紫外線滅菌爐_口罩氣流阻力測試儀_水分測定儀_微量水分測定儀_高低溫試驗箱_昆山鷺工精密儀器有限公司
全國咨詢熱線：18106904939
公司傳真：0512-36859298
企業地址：昆山的地址是江蘇省昆山市周市鎮黃浦江北路333號
LGD-22875高吸收性樹脂密度測定儀
產品分類
霍爾流速計
儀器簡介： 適用于聚丙烯鹽酸類高吸收性樹脂及粉塵堆積密度的測定，參照GB/T 22875-2008的規定。 This device is suitable for the determination of high absorptive resin and powder packing density in polypropyle
訂購熱線：18106904939
儀器簡介：
適用于聚丙烯鹽酸類高吸收性樹脂及粉塵堆積密度的測定，參照GB/T 22875-2008的規定。
This device is suitable for the determination of high absorptive resin and powder packing density in polypropylene hydrochloric acid, which conforms to the national standard GB/T 22875-2008.The test method is similar to the international related standards requirement
技術參數：
1.不銹鋼漏斗容量大于120ml，且帶有孔氏阻尼或擋板，底口內徑10±0.01mm， 角度40°；
The volume of SS funnel is greater than 120ml, and with hole damping or baffle, the inner diameter of bottom outlet is 10±0.01mm,angle 40°.
2.漏斗底部距離密度杯頂部40mm±1mm。
The distance between the bottom of funnel and the top of cup is 40mm±1mm.
3.密度杯:不銹鋼材質，容積100±0.5cm3
Density cup: stainless steel, volume 100±0.5cm3.
5.配置：水平儀、鋼尺、毛刷、說明書、保修卡、合格證.
Equipment: level, steel ruler, brush, manual, warranty card, certificate.
適用于聚丙烯鹽酸類高吸收性樹脂及粉塵堆積密度的測定，參照GB/T 22875-2008的規定。
This device is suitable for the determination of high absorptive resin and powder packing density in polypropylene hydrochloric acid, which conforms to the national standard GB/T 22875-2008.The test method is similar to the international related standards requirement
技術參數：
1.不銹鋼漏斗容量大于120ml，且帶有孔氏阻尼或擋板，底口內徑10±0.01mm， 角度40°；
The volume of SS funnel is greater than 120ml, and with hole damping or baffle, the inner diameter of bottom outlet is 10±0.01mm,angle 40°.
2.漏斗底部距離密度杯頂部40mm±1mm。
The distance between the bottom of funnel and the top of cup is 40mm±1mm.
3.密度杯:不銹鋼材質，容積100±0.5cm3
Density cup: stainless steel, volume 100±0.5cm3.
- 漏斗支撐架和底板有定位
5.配置：水平儀、鋼尺、毛刷、說明書、保修卡、合格證.
Equipment: level, steel ruler, brush, manual, warranty card, certificate.